Get in Touch

Manifestation Film Cambridge

Manifestation film in Cambridge. Glass people can see.

People walk into glass doors and full-height partitions because they don't see them. Manifestation film fixes that with bands, dots or your logo at the right heights, fitted to the glass you already have.

2
Marking heights covered
10yr
Warranty
24h
Quote turnaround
Frosted film on curved glass partitions in a Cambridgeshire office
Frosted film on glazed office doors and side panels
Professional installation
Out-of-hours fitting for businesses
10-year warranty
Cambridge and Cambridgeshire

The short answer

Why do people keep walking into our glass?

Because nothing tells their eyes the glass is there. Clear glass with no marking, a marking at the wrong height, or a frosted band that vanishes against a pale wall all look like open space. The fix is a marking at two heights, 850 to 1000mm and 1400 to 1600mm above the floor, in a colour that stands out against whatever is behind the glass.

When a client tells us people keep hitting a door or partition, it's nearly always one of these four things.

No marking at all

Common on frameless doors and partitions put in before anyone thought about it, or after a refit took the old film off and nobody replaced it.

One band at the wrong height

A logo at adult eye level does nothing for a child, a wheelchair user or someone reading their phone as they walk. That's why there are two zones, not one.

Not enough contrast

Frosted film on glass in front of a white wall is close to invisible. So is a white band with bright daylight behind it. The marking has to stand out from the background, not just exist.

The door looks like the panel next to it

When a glass door and the fixed pane beside it look identical, people aim for the wrong one. Marking the door differently, or framing the handle side, tells them where to go.

It doesn't matter how old the building is. Approved Document K covers new work, but the Workplace Regulations 1992 apply to every workplace today: glass in doors and partitions should be marked where that's needed to make it obvious. Send a photo of the glass and we'll tell you which of the four you've got.

What is manifestation film?

Why glass needs marking.

Manifestation is the name for markings that make glass obvious. Clear doors, glazed partitions and shopfronts are easy to miss, especially in a busy corridor or with bright light behind them. One walk into a pane is one too many.

In England, Approved Document K of the Building Regulations covers it. Glazing that people could walk into, such as glass doors, the panels beside them and full-height partitions, should carry permanent markings at two heights: between 850mm and 1000mm, and between 1400mm and 1600mm above the floor. The marking should contrast with whatever sits behind the glass, so it shows up in daylight and under lights.

Film is the simple way to do it. It goes onto the glass you already have, it's cut to whatever pattern you choose, and it comes off cleanly when you move or rebrand. Plain bands, dots, frosted strips and logos all work, as long as they're easy to see.

Where it's needed

Which glass needs it.

Glass doors and side panels

Frameless doors and the clear panels beside them are where most people walk into glass. Bands at both heights stop it.

Office partitions and meeting rooms

Glazed walls can be marked and screened in one go, with a frosted band or your logo at desk height. It pairs well with office refurbishment work.

Shopfronts and entrances

Full-height glazing at the front door. A logo or pattern makes the glass obvious and puts your brand at eye level.

Schools, surgeries and public buildings

Busy corridors, children and visitors with poor eyesight. This is where strong contrast matters most.

Bands, frosting or a logo?

How the options compare.

Solid bands or dotsFrosted stripsLogo or custom design
LookClean and simpleEtched-glass lookYour brand on the glass
Best forSchools, surgeries, public buildingsOffices and meeting roomsReceptions and shopfronts
Adds privacyNoSome, at band heightDepends on the design
ContrastStrongest, pick the colour to suitCan be faint against pale wallsDepends on colours used

Frosted strips look smart, but against a pale wall they can be hard to see. If the people using the building include anyone with poor eyesight, a solid colour band usually does the job better. We'll tell you honestly which one will show up on your glass.

Want more than a band? Decorative window film can carry a pattern across the whole pane, and frosted privacy film screens a meeting room completely. Either can be set out to cover both marking heights.

Common questions

What people ask before they get in touch.

Not sure what your glass needs? Send a photo of each door or partition and tell us roughly how many there are. You'll get a recommendation and a fixed quote within 24 hours.

In England, Approved Document K of the Building Regulations covers manifestation on glazing people could walk into, such as glass doors, side panels and full-height partitions. Workplaces also fall under the Workplace (Health, Safety and Welfare) Regulations 1992, which say glass doors and partitions should be marked where that's needed to make them obvious. Wales and Scotland have their own guidance. If you're unsure whether your glass needs it, send a photo and we'll tell you what we'd mark and why.
Usually because the glass has no marking, a single marking at the wrong height, or a marking that doesn't contrast with what's behind it, like frosted film in front of a white wall. Mark the glass at both heights, 850 to 1000mm and 1400 to 1600mm, in a colour that stands out from the background.
Both, in most cases. Approved Document K applies when glazing is installed or altered. For buildings already in use as workplaces, the Workplace (Health, Safety and Welfare) Regulations 1992 say glass in doors and partitions should be marked where that's needed to make it obvious. If people are walking into it, it needs marking.
Approved Document K sets two zones: between 850mm and 1000mm, and between 1400mm and 1600mm above floor level. That covers someone in a wheelchair or a child as well as an adult walking. We measure from your finished floor and set the film out to both zones.
Yes. A logo, a pattern or your brand name all count, as long as they sit within the marking heights and contrast with what's behind the glass. You approve the design before anything is cut.
No. The film sits on the surface and peels off cleanly when it's no longer needed, which suits rented offices and shops that may rebrand. It's a quick job to change the design later.
A few doors or a small run of partitions is usually done in a few hours. Larger sites are planned around you, and offices, shops and schools can be fitted early, late or at weekends so nobody is disturbed.
Yes. We're based in Wilburton near Ely and cover Cambridge and around 75 miles beyond it. Commercial installation is available nationwide.

Other film types

Every window film type. One Cambridge team.

Privacy

Frosted Film

Decorative

Reeded Film

Decorative

Patterned Film

Privacy

Gradient Film

Decorative

Coloured Film

Tactile

Textured Film

Related services

You might also be looking for.

Frosted Window Film

Full privacy for meeting rooms, bathrooms and glazed doors.

Decorative Window Film

Patterned and etched-effect film for doors, partitions and windows.

Office Refurbishment

Receptions, meeting rooms and partitions refreshed out of hours.

Get started

Glass people notice. Before they walk into it.

Send photos of your doors and partitions. A fixed quote comes back within 24 hours, with the marking heights and design agreed before anything is fitted.

Get a Free Quote Call 01223 944335

Areas covered

Window film across the area we cover.

Choose your town for local details on window film installation, based in Wilburton and covering Cambridge, Cambridgeshire and nearby.

ElyNewmarketHuntingdonSt IvesRoystonSaffron WaldenSt NeotsBury St Edmunds